Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight on a Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Headlight

See other generations:
Video tutorial

Let's see how to replace the front headlight unit on a Volkswagen Golf. Open the engine bay and unscrew the two screws located on either side of the horizontal grille, which we will remove after releasing the retaining clips. Using a plastic or wooden lever, remove the plastic trim located on the bumper, beneath the headlight.

Now, unscrew three screws that secure the headlight: the first is located at the top near the drip tray, the second at the bottom, inside, near the radiator. The third can be found in the hole revealed by removing the bumper trim.

We can now remove the headlight by disconnecting the electrical connector. Place the new headlight and repeat the steps in reverse.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

Replacement of the Front Headlight on the Volkswagen Golf
Replacement of the Front Headlight on the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today's procedure will show you how to remove and replace the front headlight on the Volkswagen Golf, following the instructions below. First, open t…
Replacing the Front Bulb on Golf 5
Replacing the Front Bulb on Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Need to replace the damaged bulb in the front headlight of a Volkswagen Golf 5? Here’s how to do it. Open the front bonnet by pulling the lever locat…
Replacing Front Headlamp Bulb on VW Golf 5
Replacing Front Headlamp Bulb on VW Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Replacing the blown bulb in the front headlamp of a Volkswagen Golf 5? Here’s how to remove and replace it. Open the front bonnet by pulling the leve…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos