Do it yourself
Frequently asked questions about cars and motorcycles

Instructions for Dashboard Removal

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Dashboard

If you need to remove the entire dashboard from the cabin (which is essential if, for example, you need to replace the heater radiator), you must be patient as there are many elements to remove in the correct sequence; start by removing the side trim caps, then move on to the air vents, the light switch button, airbag, steering wheel, indicator stalk, and steering column; continue with the instrument cluster, the centre tunnel console, and the glove compartment; disconnect the various connectors and access the fixing pins of the dashboard subframe to complete the disassembly.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this brief guide, you will find instructions to remove and replace the climate control (climatronic) controls of the Volkswagen Golf. First, get i…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In the case of a deep dent in the door, it will certainly need to be replaced rather than repaired: you will need to proceed with its removal; try to…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today's brief instructions will show you how to reset the service light for the engine oil change on the Volkswagen Golf. First, get in the vehicle a…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos