Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Immobiliser on a Volkswagen?

Model: Volkswagen Volkswagen Various
Part: Warning light – error code

When the ignition key is inserted into the ignition lock and is not recognised, the immobiliser activates, preventing the engine from starting: to resolve the issue, it may be necessary to reset the immobiliser. To do this, open the bonnet to access the battery: disconnect it by removing both terminals. The battery cables should remain disconnected for about fifteen minutes: at this point, reconnect the cables, ensuring that the device has been reset.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Fix the Immobiliser in Volkswagen Cars?
How to Fix the Immobiliser in Volkswagen Cars?
Volkswagen Volkswagen Various In today's video, you will see how to fix the immobiliser device in Volkswagen cars and other vehicles from the group, namely Skoda, Seat, and Audi. …
How do you reset the Volkswagen RNS510 car radio?
How do you reset the Volkswagen RNS510 car radio?
Volkswagen Volkswagen Various To reset the Volkswagen RNS510 car radio, you need to remove the device so that it can be taken out of its housing: to do this, you will need to loos…
How do you reset the Volkswagen's control unit?
How do you reset the Volkswagen's control unit?
Volkswagen Volkswagen Various In order to reset the Volkswagen's control unit, you need to connect a diagnostic tool to the OBD port of the vehicle: this will be located on the da…

Other guides you may be interested in

    Frequently Asked Questions

    • Volkswagen Vari - How to find the voice control activation code on Volkswagen? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos