Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the Inspection Light on Volkswagen Passat

Model: Volkswagen Passat MK 8, 3G, B8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

This video tutorial shows how to reset the inspection light, which indicates the remaining oil life, on a Volkswagen Passat, model B8 produced from 2014 to 2022. First, with the vehicle off, press and hold the "0.0/SET" button located to the right of the speedometer, then turn on the ignition without starting the vehicle.

The information display will show a request to perform the reset.

Confirm by pressing the "OK" button located on the right side of the steering wheel to complete the task.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2005-2010 / B6, 3C) In this quick and simple video tutorial, you will see how to reset the tyre pressure light on a Volkswagen Passat. Before performing the reset, ensur…
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) The information in this guide will show you the procedure to reset the tyre pressure monitoring system (TPMS) warning light on the Volkswagen Passat;…
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) The following steps will allow us to reset the inspection warning (service) of the Volkswagen Passat. First, we get into the vehicle and start pressi…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Guide to replacing the 12V battery on the Toyota Yaris Cross

Today, we will go through the main instructions to remove and replace the 12V battery on the Toyota Yaris Cross. First, open the right rear door of the vehicle and start by removing the plastic cover located under the seat in the corner. You will find the battery inside, where you will disconnect both battery terminals (positive and negative), as shown in the video. Now, remove and replace the battery with a new one of the correct type and the same amperage; then, reinstall the battery and finally the plastic cover.

Watch the video!


by ScegliAuto

More videos