Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Volkswagen Passat?

Model: Volkswagen Passat B8, 3G, MK 8 - Years 2014-2023
Part: Service warning light

In this tutorial, see how to reset the service light on the Volkswagen Passat, a very simple and quick operation. Before proceeding, ensure you have completed all required scheduled maintenance tasks. Start by entering the cabin, then insert the key but keep it in the initial position. Next, press the "0.0/SET" button located to the right of the dashboard, simultaneously switch on the ignition, and when the screen changes, select "OK". To verify that the operation was successful, you can restart the vehicle.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volkswagen Passat
How to Reset the Service Light on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) If the service light appears on the dashboard of your Volkswagen Passat (2010-2014) even after servicing the vehicle, do not worry as you can manuall…
How to reset the "Service" light on a Volkswagen Passat?
How to reset the "Service" light on a Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) To reset the "Service" light on a Volkswagen Passat, start the instrument panel without turning on the engine. Use the controls on the steering wheel…
How to Reset the "Service" Light on a Volkswagen Passat
How to Reset the "Service" Light on a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Before you can begin, sit in the driver's seat of your Volkswagen Passat. Start by pressing and holding the spanner-shaped button located above the i…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos