Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to replace the cabin filter in a Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 6, MK VI, AW1, MK 6, Polo VI - Years 2017-2024
Part: Cabin air filter
Operation: How to replace the cabin filter in a Volkswagen Polo

In this video tutorial, we can see how it is possible to replace the cabin filter in a Volkswagen Polo by following a few simple steps: the first thing to do is to purchase a new pollen filter from an auto parts dealer. The next step is to get into the car, turn off the engine, and engage the handbrake. Open the glove compartment and remove everything inside. Lift the two clips located at the top of the compartment (see video), at this point the compartment will lower completely and we can see the cabin filter door. Remove the door and extract the filter from its housing. Insert the new filter in the direction indicated by the arrows on the filter itself.


Posted on 14 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - What does the cabin filter light on the Volkswagen Polo 4 mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos