Do it yourself
| ||||
|
Volkswagen Crafter - Video tutorial
Model: Volkswagen Crafter
MK 1, 2F, 2E
- Years 2006-2017 In this tutorial, we can see how to reset the service in the Volkswagen Crafter van, an extremely simple and quick operation. Before proceeding, we must have completed all the required scheduled maintenance work. Let's start by going inside the cabin, then turn on the instrument panel and, using the directional buttons located on the left side of the steering wheel, reach the screen related to the coolant temperature. Then, press and hold the "0" button on the dashboard, wait for the audible signal, and move to the service screen using the same buttons. At this point, perform the reset by again holding down the "0" button.
Posted on 30 August 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |