Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Polo
  6. : How to disassemble the rear taillight of the Volkswagen Polo 4.

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Tail light
Operation: How to disassemble the rear taillight of the Volkswagen Polo 4.

Below we will discover together how to disassemble the entire rear light of your Volkswagen Polo fourth series (year 2001-2009) quickly and safely. First, park the car safely and make sure to turn it off completely. Immediately after, reach the rear exterior of the vehicle, lift the trunk and unscrew the safety hook of the light by rotating it counterclockwise. Finally, pull the light towards you and disconnect the electrical pin. The procedure is now successfully completed and you can proceed with a possible replacement of the bulbs or the light itself.


Posted on 2 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos