Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

To reset the inspection light on the Volkswagen Polo.

Model: Volkswagen Polo 6R, Polo 5, MK 5, Polo V, MK V - Years 2009-2017
Part: Service warning light

Below we will see the necessary procedure to reset the maintenance service light for the oil change of the Volkswagen Polo. First, we get into the car and start by pressing and holding the button located on the left side of the instrument panel. Then, we turn on the instrument panel and wait for the service reset message to appear, and then press the set button located on the right to reset the maintenance kilometers, as shown in the video. At this point, we turn off the instrument panel and start the engine, checking that the service light has been reset!

Posted on 23 September 2023 by ScegliAuto

Video tutorial

Related tutorials

To reset the inspection light on the 2017 Volkswagen Polo.
To reset the inspection light on the 2017 Volkswagen Polo.
Volkswagen Polo (2009-2017 / 6R, Polo 5, MK 5, Polo V, MK V) To reset the inspection light on the Volkswagen Polo, get into the car and close all four doors. Turn on the ignition without starting the engine. Ho…
How to reset the inspection warning (INSP) on the Volkswagen Polo
How to reset the inspection warning (INSP) on the Volkswagen Polo
Volkswagen Polo (2001-2009 / Polo 4, 9N, Polo IV, MK IV, MK 4) In short, we will see the process that will allow us to reset the inspection warning (INSP) on the Volkswagen Polo. First, we get into the car and st…
How to reset the tire pressure warning light on the Volkswagen Polo
How to reset the tire pressure warning light on the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, Polo 5, MK 5, Polo V, MK V) Today's video will show us how to check and reset the tire pressure monitoring system (TPMS) light on the Volkswagen Polo; before performing the rese…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos