Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling and Replacing the Radio Antenna

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Antenna

See other generations:
Video tutorial

The first step is to remove the rear plastic trim from the roof held by four clips. Also, free the side covers of the pillars to lower the headlining and access the retaining bolt of the antenna base.

Disconnect the connector and using a 22mm ratchet, undo the antenna retaining bolt. Remove the antenna and unscrew the two screws under the support to check the condition of the circuit inside.

If there is any corrosion due to water ingress, it is advisable to replace the entire antenna. Refit the antenna, ensuring the rubber seal at the base is properly seated.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Removing the Radio from a Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Do you want to replace the radio in a Golf 4? Here’s how to remove it from inside the dashboard and how to fit the new one. Remove the radio using th…
How to install the shark fin antenna on a Volkswagen Golf 4
How to install the shark fin antenna on a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Installing the shark fin antenna on a Volkswagen Golf MK 4 is a simple and quick operation that can be done independently. The antenna can be purchas…
How to replace the radio of the Volkswagen Golf 6
How to replace the radio of the Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today we will explain how to install the t72 model car stereo on the Volkswagen Golf 6. We start the replacement by removing the frame of the previou…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos