Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Automatic Gearbox of a 2009 VW Passat

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Warning light – error code

See other generations:
Video tutorial

Today, you will learn the steps to reset the automatic gearbox of a 2009 Volkswagen Passat. This maintenance operation is very simple and can be done independently.

The first step is to insert the key into the ignition and press the accelerator pedal fully for 15 seconds. The second step is to release the pedal after 15 seconds and turn on the ignition.

The third and final step is to move the gearbox in all directions. Finally, you can switch off the ignition.


Updated on 19 August 2026 by ScegliAuto


Related tutorials

How to Unlock the Wheels and Shift the Automatic Gearbox of the Volkswagen Passat into Neutral
How to Unlock the Wheels and Shift the Automatic Gearbox of the Volkswagen Passat into Neutral
Volkswagen Passat (2005-2010 / B6, 3C) In this video tutorial, you will learn how to shift the automatic gearbox into neutral to unlock the wheels in case of engine failure on the Volkswag…
Replacing the Neutral Safety Switch
Replacing the Neutral Safety Switch
Volkswagen Passat (1996-2005 / 3BG, B5) On vehicles equipped with an automatic gearbox, there is a switch that allows the display on the instrument cluster to show which gear is engaged via…
How to Reset the "Service" Light on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Before you begin, sit in the driver's seat of your Volkswagen Passat. Insert the electronic key into the designated slot. Next, press and hold the bu…

Other guides you may be interested in

    Frequently Asked Questions

    • Passat 2005-2010 - What is the car radio code of a Volkswagen Passat? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos