Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the "Component Protection Active" Message on the Volkswagen Golf Display?

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Checks and maintenance

When the central display of the Volkswagen Golf shows the message "Component protection active", it indicates a general electronic problem that affects the proper functioning of the infotainment system: to reset this warning, connect a diagnostic tool to the vehicle's OBD port, located under the steering column. This will allow you to select the car model in question and proceed to clear the error that triggers the message; finally, disconnect the scanner and switch off the instrument cluster.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The wording "Component protection active" that appears on the display of the Volkswagen Golf can be addressed by connecting a diagnostic tool to the …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The procedure for removing the message "Component protection active" on the display of the Volkswagen Golf is done by connecting a diagnostic tool to…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) When the message "Component protection active" appears on the central display of a Volkswagen Golf, it means there is a general electronic issue prev…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos