Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Passat
    4. : Replacement of the fuel filter of the Volkswagen Passat

Volkswagen Passat - Video tutorial

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Diesel filter
Operation: Replacement of the fuel filter of the Volkswagen Passat

To ensure a consistently clean flow of diesel fuel to the Volkswagen Passat's fuel system, we need to periodically replace the diesel fuel filter. To do this, we open the hood of the engine compartment, locate the filter on the passenger side, place absorbent paper around it to contain any fuel spills, unscrew the screws that secure the flange using a T20 Torx wrench, and lift it up. Carefully remove the old filter element, empty any remaining diesel fuel, and clean the housing. Install the new filter and fill it with fuel, then reposition the flange and secure it with its screws.


Posted on 5 November 2023 by ScegliAuto



How to replace the fuel filter on VW Passat
Volkswagen Passat (2005-2010 / 3C, B6) How to replace the fuel filter in your car without running into labor costs? Let's see in this video how to do it yourself and how to best remove the
Replacement of the fuel door actuator of the Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Today we will see the instructions that will allow us to disassemble and replace the fuel door actuator of the Volkswagen Passat. First, we open the
How to remove the fuel filter on Volskwagen Passat
Volkswagen Passat (2005-2010 / 3C, B6) Today we are going to see how to go and replace the fuel filter on our Volkswagen Passat. First we open the engine hood and go to locate where the fi

    Frequently Asked Questions

    • Passat 2005-2010 - Where is the diesel filter of a Volkswagen Passat located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos