Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Touareg
    4. : How to replace the starter motor of the Volkswagen Touareg V8.

Volkswagen Touareg - Video tutorial

Model: Volkswagen Touareg MK 1, 7L - Years 2002-2010
Part: Starter motor
Operation: How to replace the starter motor of the Volkswagen Touareg V8.

Let's see the steps that will allow us to disassemble and replace the starter motor of the Volkswagen Touareg, with a V8 engine. First, we lift the vehicle and start by removing the right front wheel; then we proceed to remove the fender and subsequently the front half-shaft, in order to access the starter motor, as shown in the video. At this point, we remove the air filter box from the engine compartment, unscrewing the fastening screws of the starter motor; we disconnect the electrical connector to remove it and replace it with the new one, following the video tutorial until the end!


Posted on 8 November 2023 by ScegliAuto



How to replace the starter motor of the Volkswagen Touareg V10.
Volkswagen Touareg (2002-2010 / MK 1, 7L) Today's instructions will illustrate the main steps useful for disassembling and replacing the starter motor of the Volkswagen Touareg V10. First, we
How do you replace the starter motor of the Volkswagen Touareg?
Volkswagen Touareg (2002-2010 / MK 1, 7L) In order to replace the starter motor of the Volkswagen Touareg, it is necessary to lift the car with a jack or a lift, so that access to the compone
How to replace the starter motor of the Volkswagen Touareg 2.5 TDI
Volkswagen Touareg (2002-2010 / MK 1, 7L) In this guide, let's discover the instructions that will allow us to disassemble and replace the starter motor of the Volkswagen Touareg 2.5 TDI. Fir

Other guides that may interest you

    Frequently Asked Questions

    • Touareg 2002-2010 - Where is the starter motor on the Volkswagen Touareg located? Read Answer

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos