Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to replace the gearbox oil of the Volkswagen Polo 1.2.

Model: Volkswagen Polo Polo IV, MK IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Gear oil

In this guide, we will perform the drainage and subsequent refilling of the transmission oil for the Volkswagen Polo 1.2 12-valve. First, we lift the vehicle and start loosening the oil drain bolt that we find on the gearbox, using a socket wrench, allowing it to drain into a container for about ten minutes. Then, we proceed to loosen the transmission oil fill cap. At this point, we refill it with the appropriate oil, with the correct specifications; we pour the right amount, as indicated in the vehicle's user manual and maintenance booklet!


Posted on 16 November 2023 by ScegliAuto



How do you remove the Volkswagen Polo gearbox?
Volkswagen Polo (2009-2017 / Polo 5, MK 5, 6R, MK V, Polo V) In order to remove the Volkswagen Polo gearbox, the hood must be opened to gain access to the engine compartment. Once the hood has been opened, it w
How do you remove the Volkswagen Polo gearbox?
Volkswagen Polo (2009-2017 / Polo 5, MK 5, 6R, MK V, Polo V) To be able to remove the gearbox from the Volkswagen Polo, you need to go and open the bonnet, so that you can remove the cover from the upper part o
Volkswagen Polo 1.2 TSI engine oil and oil filter replacement
Volkswagen Polo (2009-2017 / Polo 5, MK 5, 6R, MK V, Polo V) In this video tutorial we will see how to replace the engine oil and oil filter of a Volkswagen Polo 1.2 TSI. First we open the engine hood and go to

Other guides that may interest you

How to remove the telepass holder from the windshield

Today we will explain how to remove the telepass holder from a vehicle's windshield. Removing the telepass holder from the windshield is a very simple and quick operation to perform independently, you just need to use nylon thread that you will need to pull towards the holder and pass it between the holder and the clip. After performing this operation, the holder will be removed. There may be glue residues on the windshield that can be removed with a solvent suitable for glass cleaning. After cleaning everything, it is possible to mount another telepass holder on the windshield in the same position as the one removed or elsewhere.

Watch the video!


by ScegliAuto

More videos