Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Checking Fault Memory of Control Units

Model: Volkswagen Jetta MK 5, A5 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Onboard computer

See other generations:
Video tutorial

If nearly all the warning lights on the instrument panel remain illuminated, you need to check the fault memory of the various control units using a diagnostic tool: once the vehicle type is selected, the diagnosis allows you to scan all control units, identifying those with errors in memory; at this point, you will analyse the error codes stored by each control unit and initially attempt to clear the fault memory; to eliminate some of them, it may be necessary to perform calibrations and/or adjustments, such as in the case of calibrating the steering angle sensor.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Airbag Warning Light Reset Instructions
Airbag Warning Light Reset Instructions
Volkswagen Jetta (2005-2010 / MK 5, A5) If the red airbag warning light remains illuminated on the instrument cluster display, you must carry out a fault memory check in the relevant contro…
Instructions for Replacing Glow Plugs
Instructions for Replacing Glow Plugs
Volkswagen Jetta (2005-2010 / MK 5, A5) It is recommended to perform this maintenance with the engine cold since the glow plugs are screwed directly into the cylinder head; you can also ide…
Replacing Air Flap Actuator Motors
Replacing Air Flap Actuator Motors
Volkswagen Jetta (2005-2010 / MK 5, A5) In case of issues with the air conditioning system, one potential fault may lie in the air flap control system that recycles air in the cabin. To rep…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos