Do it yourself
| ||||
|
Volkswagen Golf - Video tutorial
Model: Volkswagen Golf
Golf VII, MK 7, Golf 7
- Years 2012-2019 The operation of removing the front headlight on the Volkswagen Golf 7 is carried out by loosening the screws that fix the grille of the front part of the engine compartment and removing it. Subsequently, the bolts that fix the front bumper, located between its upper part, the lower part, and the inner part of the wheel arches, must be loosened. By detaching the bumper, it will be possible to loosen the screws that fix the headlight inside its housing, disconnect the connector at the rear, and remove it from its housing. After the headlight has been removed, it will be possible to replace it and install all the components that have just been disassembled.
Posted on 6 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.039
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |