Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper Grille of the Volkswagen Passat

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Front bumper

See other generations:
Video tutorial

First, you need to remove the lower panel located directly under the engine, which is attached to the bumper with screws. Now, unclip and lift the bonnet to remove the opening mechanism.

Next, proceed to remove the bolts located next to the headlights on the inner side. This will allow you to lift the upper part of the grille; by unlocking the lower clips, you can fully extract it. Now, remove the bolts that were underneath it, and you can proceed to extract the bumper by simply pulling it outwards.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of a Volkswagen Passat
How to Remove the Front Bumper of a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Before you can start, open the bonnet of your Volkswagen Passat. Begin by unscrewing and removing the screws that secure the front grille, then uncli…
Replacing the Headlight Bulbs of the Volkswagen Passat
Replacing the Headlight Bulbs of the Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) This procedure shows how to remove and replace the dipped and main beam bulbs of the front headlight on the Volkswagen Passat. First, open the bonnet…
How to Remove the Front Bumper of the Volkswagen Passat?
How to Remove the Front Bumper of the Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) To remove the front bumper of the Volkswagen Passat, first remove the grille located in the centre of the bumper: this will be secured by screws foun…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos