Do it yourself
Frequently asked questions about cars and motorcycles

How to Install Puddle Lights on the Volkswagen Passat

Model: Volkswagen Passat B7 - Years: 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, see how to install puddle lights on the Volkswagen Passat. You can purchase the kit for this job, for example, on andmonc.com with code 8057507780203, priced at £39.99, complete with can-bus cables; free shipping.

You will need to remove the door panel (you will surely find one of our tutorials that covers this) and then access the door control unit number 42. Disconnect the 32-pin connector and add a red wire to pin number 16 (positive) and another to pin number 5 (negative). (It was already connected, so our YouTuber just made a bridge).

Naturally, you will need to do this on both doors.

Connect to the OBD port and enter the various control units until you reach control unit 42, perform the complete coding with the bits, at BIT 01, and activate bit number 2. Then go to control unit 52 and follow the same procedure. With this, the door lights will be fully operational.

Finally, reassemble the panel.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2005-2010 / B6, 3C) Let’s go through the main steps to remove the interior light unit to replace the bulbs on a Volkswagen Passat B6. First, get inside the car and use a…
Volkswagen Passat (2010-2014 / B7) Let's briefly go over the steps to remove and replace the bulbs of the interior light in a Volkswagen Passat, following the instructions below. First…
Volkswagen Passat (2010-2014 / B7) Today's instructions will show you how to install the rear camera on the Volkswagen Passat, following these simple steps. First, open the boot lid an…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Guide to replacing the 12V battery on the Toyota Yaris Cross

Today, we will go through the main instructions to remove and replace the 12V battery on the Toyota Yaris Cross. First, open the right rear door of the vehicle and start by removing the plastic cover located under the seat in the corner. You will find the battery inside, where you will disconnect both battery terminals (positive and negative), as shown in the video. Now, remove and replace the battery with a new one of the correct type and the same amperage; then, reinstall the battery and finally the plastic cover.

Watch the video!


by ScegliAuto

More videos