Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump in the Volkswagen Golf?

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Fuel pump

See other generations:
Video tutorial

In this tutorial, you will see how to replace the fuel pump in the Volkswagen Golf, a very simple and quick operation. Before proceeding, open the bonnet and disconnect the negative terminal of the battery to work safely.

Start by going to the rear of the vehicle, then lift the seat cushion upwards and separate it from the base. Next, open the large circular cap by unscrewing the three screws, disconnect both the pipes and the connector, and unscrew the outer ring.

At this point, you can extract the pump from the tank and install the replacement.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Pump from a Volkswagen Golf Mk4
How to Remove the Fuel Pump from a Volkswagen Golf Mk4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) How do you remove the fuel pump from a Volkswagen Golf Mk4? First, disconnect the battery cables. Next, remove the rear seat cushions from the car. U…
How to Change the Fuel Pump in a Volkswagen Golf
How to Change the Fuel Pump in a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this tutorial video, see how to remove and replace the fuel pump in a Volkswagen Golf by following the instructions below. First, open the rear do…
How to Remove the Fuel Pump from a Volkswagen Golf Mk5
How to Remove the Fuel Pump from a Volkswagen Golf Mk5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) How do you remove the fuel pump from a Volkswagen Golf Mk5? First, disconnect the battery cables, then remove the rear seat cushions of the car. Use …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos