Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset maintenance on a Volvo XC60

Model: Volvo Xc60 MK 2 - Years 2017-2025
Part: Checks and maintenance

Today we will see how to reset the maintenance light on a Volvo XC60, second generation model produced from the year 2017 onwards. Let's start by pressing the "-" button, located on the left side of the steering wheel, and then turn on the car's ignition to the first position. Then, continue to hold down the "-" button and start the car as shown in the video. After doing this, we will see the "i" light flashing on the speedometer, so continue to hold down the "-" button until the light flashes three times to reset the maintenance.

Posted on 4 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Volvo XC60?
How to reset the "Service" light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) Good morning, today's guide aims to reset the "Service" light on our Volvo XC60. Before we begin, we should have completed the recommended service. L…
How to reset the maintenance service reminder on the Volvo XC60
How to reset the maintenance service reminder on the Volvo XC60
Volvo Xc60 (2017-2025 / MK 2) Today we will discover the information that will allow us to reset the regular maintenance warning (service) on the Volvo XC60. First, we get into th…
How to reset the service light on the Volvo XC60 MK2
How to reset the service light on the Volvo XC60 MK2
Volvo Xc60 (2017-2025 / MK 2) In this video we can see how to reset the service light of the Volvo XC60 MK2: we need to get into the car, close all the doors and, without pressing…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos