Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to top up the coolant in a Volvo car

Model: Volvo Volvo Various
Part: Checks and maintenance

Video tutorial

In this video we can see how to top up the coolant in the specific tank of a Volvo car. Of course, to do this operation the engine must be completely turned off; even better is to remove the key from the ignition. The engine must be cold in order to top up the antifreeze liquid.

The tank is located on the right side of the engine compartment, and is identified by a noticeable blue cap; if the engine were hot, the steam coming out of the tank would seriously damage our skin. We only use Volvo antifreeze to top up, and fill the expansion tank.

Close the cap and we can continue our journey.


Posted on 2 December 2024 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Volvo Car
How to Reset the Service Light on a Volvo Car
Volvo Volvo Various In this video, see how to reset the service light on a Volvo car. The reset method is generally the same across models. Close all the vehicle doors, …
Where are the fuses of the Volvo trucks located?
Where are the fuses of the Volvo trucks located?
Volvo Volvo Various All Volvo truck fuses are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle, there is generally a …
How to Know the Fuse Diagram of a Volvo 240-260
Volvo Volvo Various In a Volvo 240 or its subsequent version 260, there is only one fuse box, located inside the vehicle's cabin, exactly at the upper left end relative …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos