Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light on the Volvo V60.

Model: Volvo V60 MK 1 - Years 2010-2018
Part: Service warning light

Today's procedure will allow us to reset the maintenance service reminder for the oil change of the Volvo V60. First, we get into the car and insert the key, then press the ignition button once; next, we press and hold down the ignition and reset buttons (located to the right of the instrument panel) until the service light stops flashing, as shown in the video. At this point, we turn off the instrument panel to complete the reset of the light, and then start the engine!

Posted on 24 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volvo V60?
How to Reset the Service Light on a Volvo V60?
Volvo V60 (2010-2018 / MK 1) The procedure to reset the service light on a Volvo V60 is not complicated, takes only a few seconds, and is DIY. It should be noted that this is don…
Resetting the tire pressure warning on the Volvo V60.
Resetting the tire pressure warning on the Volvo V60.
Volvo V60 (2010-2018 / MK 1) Following these brief and simple instructions, we will see how to recalibrate the TPMS sensors and reset the tire pressure warning on the Volvo V60; …
Resetting the TPMS warning light on the Volvo V60.
Resetting the TPMS warning light on the Volvo V60.
Volvo V60 (2018-2026 / MK 2) Below we will see the operation that will allow us to reset the tire pressure warning light of the Volvo V60; before performing the TPMS sensor reset…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos