Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Check Engine Oil Level and Top Up

Model: Volvo S40 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Engine oil

See other generations:
Video tutorial

Open the bonnet and ensure it is safely supported. Remove the dipstick for the engine oil level, clean the tip, and reinsert it to check the level to assess any oil consumption: the dipstick has two marks indicating the minimum and maximum levels.

The difference between the minimum and maximum levels is one litre of oil: if the level is at the minimum, top up the engine oil through the appropriate cap, pouring in one litre of oil according to the SAE specifications indicated in the user and maintenance manual.

Check the level again after topping up.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Instructions for Topping Up Coolant
Instructions for Topping Up Coolant
Volvo S40 (1995-2004 / MK 1) Before topping up the coolant, first check why the level has dropped: it could be a leak or consumption caused by a potential head gasket malfunction…
DIY Service, Engine Oil and Filter Replacement
DIY Service, Engine Oil and Filter Replacement
Volvo S40 (1995-2004 / MK 1) Replacing the oil and the corresponding filter are simple but very important operations for the longevity of the engine; it is advisable to strictly …
Antifreeze Replacement
Antifreeze Replacement
Volvo S40 (1995-2004 / MK 1) Carry out this maintenance with the engine cold to avoid unpleasant burns. Open the cap of the coolant reservoir; remove the splash guard and unscrew…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos