Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door Panel

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Door trim panel

See other generations:
Video tutorial

First, remove the triangular plastic cover located near the outside rearview mirror; disconnect the cover of the internal handle and remove the screws located just behind it; use a flat tool to disengage the pressure clips along the edges of the panel, pull out the lock rod, and disconnect the cable of the internal opening handle, then disconnect the connectors linked to the power window switch.

For reassembly, proceed in reverse: reconnect the connectors, the cable, reattach the pressure clips along the edges, screw in the screws under the handle, and reposition the handle.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to Remove the Exterior Door Handle of the Front Door on a Volvo XC90
How to Remove the Exterior Door Handle of the Front Door on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today, let's go through the instructions to remove and replace the exterior door handle of the front door on a Volvo XC90. First, open the front door…
How to Remove the Exterior Door Handle on a Volvo XC 90
How to Remove the Exterior Door Handle on a Volvo XC 90
Volvo Xc90 (2002-2014 / MK 1) In today's video, you will see the main instructions for removing the exterior door handle on a first-generation Volvo XC 90. First, open the front d…
How to Remove the Front Door Panel of the Volvo XC90
How to Remove the Front Door Panel of the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) In a few simple steps, you will learn how to remove the front door panel of the Volvo XC90 by following the instructions below. First, open the front…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos