Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Air Filter

Model: Volvo Xc70 MK 2 - Years 2000-2007
Part: Cabin air filter

Frequently replacing the pollen filter helps prevent allergies as it purifies the air in the cabin. The filter is located under the trim at the passenger side footwell. To access it, carefully remove several electrical components. Finally, remove the cover located at the side of the tunnel, then take off the lid, which can be done by hand. Once the filter cover is removed, take out the cartridge from its housing by pulling it out carefully to avoid dust dispersal. Obtain a pollen filter of the same model identical to the original. Clean the housing area of any dirt. Reinsert the new cartridge into the container, ensuring correct orientation, and reassemble the removed components.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Engine Oil and Filter
Replacing Engine Oil and Filter
Volvo Xc70 (2000-2007 / MK 2) This video shows how to replace the engine oil and its filter. First, lift the car, then remove the plastic panels protecting the underbody, unscrew …
How to Replace the Cabin Fan Resistor on a Volvo XC70?
How to Replace the Cabin Fan Resistor on a Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) To replace the cabin fan resistor on a Volvo XC70, start by removing the side cover of the centre console located near the driver's footwell. Once th…
How do I move the radio of the Volvo XC70
How do I move the radio of the Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) Removing the radio on a Volvo XC70 is a piece of cake, in fact, to carry out the replacement we need to use a flat-head screwdriver and a Torx key. W…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos