Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Volvo V50?

Model: Volvo V50 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Timing belt

Video tutorial

To replace the timing belt on a Volvo V50, loosen the screws that secure the panel located at the bottom of the engine bay so that it can be removed. This will allow access to the crankshaft pulley.

You may also need to remove the front right wheel: by loosening this pulley and all others located on the left side of the engine block, you can detach the belt and replace it with a new spare part. After installing the new belt, reassemble all previously removed parts.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How do you replace the timing belt of the Volvo V50?
How do you replace the timing belt of the Volvo V50?
Volvo V50 (2004-2012 / MK 1) In order to replace the timing belt of the Volvo V50, you need to lift the car so that the right front wheel is not in contact with the ground: once …
Guide to Replacing the Timing Belt on the Volvo V50 2.0L
Guide to Replacing the Timing Belt on the Volvo V50 2.0L
Volvo V50 (2004-2012 / MK 1) This guide will show you how to remove and replace the timing belt on the Volvo V50 2.0L, as well as the V70. First, open the bonnet and begin by rem…
Where are the fuses located in the Volvo V50?
Where are the fuses located in the Volvo V50?
Volvo V50 (2004-2012 / MK 1) The fuse boxes of the Volvo V50 serve to contain the fuses present on the vehicle and are identical to those present on the Volvo S40. In this type o…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos