Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc60
    4. : Box and fuse diagram on a Volvo XC60

Volvo Xc60 - Video tutorial

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Fuse box
Operation: Box and fuse diagram on a Volvo XC60

In this video guide, we can see the location of the three fuse boxes along with all their corresponding diagrams on a first-generation Volvo XC60, a model produced from 2013 to 2017. The first fuse box can be found inside the cabin, positioned behind the passenger-side glove compartment. The second fuse box, on the other hand, is located inside the engine compartment, situated on the top right above the air filter box. The third and final fuse box can be found inside the vehicle's trunk, positioned on the left behind a small removable panel.


Posted on 22 July 2023 by ScegliAuto



Fuse diagram for the Volvo XC60
Volvo Xc60 (2017-2024 / MK 2) In this short video tutorial, we will see where the three fuse boxes are located on a second-generation Volvo XC60. The first fuse box can be found o
Fuse box diagram of a Volvo XC60.
Volvo Xc60 (2017-2024 / MK 2) Thanks to this short tutorial, we can see the diagrams of the three fuse boxes inside our second-generation Volvo XC60, model produced from the year
Where is the fuse box of the Volvo XC60 located?
Volvo Xc60 (2008-2016 / MK 1) If you still don't know where the fuse box of your first generation Volvo XC60 is located, don't worry because in the following mini guide dedicated

    Frequently Asked Questions

    • Xc60 2017-2024 - Where are the fuses for the electrical sockets of the Volvo XC60 located? Read Answer
    • Xc60 2017-2024 - Where is the fuse box located in the Volvo Xc60? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos