Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the grille and badge from a Volvo V50

Model: Volvo V50 MK 1 - Years 2004-2012
Part: Manufacturer emblem

In this video, see how to remove the front grille and badge from a Volvo V50 to replace it: use a plastic spatula to remove the grille without damaging the bodywork. This operation is quite simple, as shown in the video. Removing the badge from the grille is a bit more laborious (the YouTuber wants to paint the front grille black, while the badge should remain silver). However, it's nothing impossible: just flip the grille over and with a bit of care and patience, using pliers, you can remove the clip to free the badge from the top side, then clean and paint the grille comfortably.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the Volvo V50
Volvo V50 (2004-2012 / MK 1) In this video, you will learn how to replace the battery of the remote control for the Volvo V50. Start by taking the remote in hand and extracting t…
How to Remove the Door Panel on Your Volvo V50
How to Remove the Door Panel on Your Volvo V50
Volvo V50 (2004-2012 / MK 1) This video will show you how to easily and quickly remove the door panel on your Volvo V50. First, using a trim removal tool, detach the plastic cove…
How do you replace the front headlight bulb of the Volvo V50?
How do you replace the front headlight bulb of the Volvo V50?
Volvo V50 (2004-2012 / MK 1) The replacement of the headlight bulb of the Volvo V50 can be done by opening the hood, so that it is possible to access the screws that secure the h…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos