Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Alfa Romeo 156 MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Cabin air filter

Video tutorial

Obtain a pollen filter of the same model identical to the original. The pollen filter purifies the air in the cabin and is located in the engine compartment under the windscreen.

To access it, remove the air grille and the protective cover by freeing it from the rubber seal. Move the cover by lifting it. Once the filter cover is removed, take out the cartridge from its housing by carefully pulling it upwards to avoid dust dispersal.

Reinsert the new filter into the housing, paying attention to the orientation, and securely close the cover and grille.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Alfa Romeo 156 (1997-2007 / MK 1) Obtain a pollen filter of the same model as the original. The pollen filter purifies the air in the cabin and is located in the engine compartment un…
How to Replace the Cabin Air Filter on an Alfa Romeo 156
How to Replace the Cabin Air Filter on an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) Before you begin, open the front passenger door of your Alfa Romeo 156. Start by unscrewing and removing the screws that secure the lower cover of th…
How to Replace the Air Filter on Alfa Romeo 156
How to Replace the Air Filter on Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) In this video tutorial, see how to replace the air filter on an Alfa Romeo 156 by following these simple steps: First, purchase a new air filter from…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos