Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : Cabin air filter replacement

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Cabin air filter
Operation: Cabin air filter replacement

Get the pollen filter of the same model identical to the original. The pollen filter purifies the air in the passenger compartment and is located in the engine compartment under the windscreen. To access the removal it is necessary to rotate the two side hooks and remove the screws of the air grille and of the protective cover freeing it from the rubber gasket. Move the cover by lifting it. Once the filter cover has been removed, remove the cartridge from its housing only by carefully pulling it upwards to avoid the dispersion of dust. Put the new filter back into its housing paying attention to the direction of positioning and carefully close the lid and the grille.


Posted on 21 June 2023 by ScegliAuto



Cabin air filter replacement
Alfa Romeo 156 (1997-2007 / MK 1) Get the pollen filter of the same model identical to the original. The pollen filter purifies the air in the passenger compartment and is located in
How to replace the cabin air filter on an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) Before we can start, we will have to open the front passenger door of our Alfa Romeo 156. Let's start by unscrewing and removing the screws that secu
How to replace the air filter on Alfa Romeo 156.
Alfa Romeo 156 (1997-2007 / MK 1) In this video tutorial, we can see how it is possible to replace the air filter on an Alfa Romeo 156 by following a few simple steps: the first thing

Other guides that may interest you

    Frequently Asked Questions

    • 156 1997-2007 - Where is the Alfa Romeo 156 pollen filter located? Read Answer

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos