Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : How to replace the Alfa Romeo 147 windshield washer pump?

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Checks and maintenance
Operation: How to replace the Alfa Romeo 147 windshield washer pump?

In order to replace the Alfa Romeo 147 windshield washer pump, you need to loosen the screws that secure the radiator, so that you can access and extract the washer tank by removing its fixing screws and disconnecting the pipes. Then you will need to remove the wheel arch on the passenger side, in order to connect the pump to the relative pipes, as indicated in the tutorial. At this point it will be necessary to re-fit the windshield wiper reservoir, connect it to the pump and re-fit the car radiator. To finish the job it will be possible to re-fit the wheel arch and the wheel.


Posted on 21 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 147 2000-2010 - What are the position bulbs on the Alfa Romeo 147? Read Answer
    • 147 2000-2010 - What does the "code system failure" message mean in the Alfa Romeo 147? Read Answer
    • 147 2000-2010 - How to reset the Alfa Romeo 147 engine failure warning light? Read Answer
    • 147 2000-2010 - How many km do you have to carry out a service on the Alfa Romeo 147? Read Answer
    • 147 2000-2010 - Why don't the electric windows of the Alfa Romeo 147 work? Read Answer
    • 147 2000-2010 - How much does it cost to change ownership of an Alfa Romeo 147? Read Answer
    • 147 2000-2010 - Where is the window regulator fuse located in the Alfa Romeo 147? Read Answer
    • 147 2000-2010 - What does the Alfa Romeo 147 airbag warning light indicate? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos