Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Audi A4 steering wheel replacement

Model: Audi A4 B8 - Years 2007-2016
Part: Steering wheel

Do we want to remove the steering wheel of the car? Let's see the replacement of the steering wheel on an Audi A4. Before disassembling the steering wheel we must remove the airbag. We insert a screwdriver into the steering wheel cover (rear of the steering wheel). Once the airbag tightening screws (driver's side) have been unscrewed, we disconnect the power supply terminals and extract the same from the steering wheel. Unscrew the central screw that tightens the steering to the barrel (remove the steering at the end of the disassembly). We mount the new steering above the barrel, screw in the clamping screws. We connect the power terminals and fix the airbag with screws.

Posted on 23 November 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the steering wheel on Audi A4
How to remove the steering wheel on Audi A4
Audi A4 (2007-2016 / B8) How to remove the steering wheel of an Audi A4? Before disassembling the car steering wheel, disconnect the battery terminals in the engine compartme…
Audi A4 B6 ignition cylinder disassembly instructions
Audi A4 (2000-2004 / B6) In this video tutorial we will see the main instructions to be able to disassemble and replace the ignition cylinder of an Audi A4 B6. First we go in…
How to remove the steering wheel of an Audi A4?
How to remove the steering wheel of an Audi A4?
Audi A4 (2004-2008 / B7) To disassemble the steering wheel of an Audi A4, start by disconnecting the negative terminal of the battery to avoid the risk of accidental activati…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos