Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the starter motor of the Audi A4 1.9 TDI - 2.0 TDI

Model: Audi A4 B7 - Years 2004-2008
Part: Starter motor

In this guide, let's find out the steps on how to disassemble and replace the starter motor of the Audi A4, both with 1.9 and 2.0 TDI engines. First we lift the car on the front side and remove the left wheel; then let's unscrew the starter motor fixing screws, which we find right under the engine block, as shown in the video. At this point we disconnect the power cables to remove it; now let's replace it with the new one, with the original spare part. So let's proceed with the installation of the new starter, following the video until the end!

Posted on 24 September 2022 by ScegliAuto

Video tutorial

Related tutorials

Replacing the glow plugs on the Audi A4 B8 2.0 TDI
Replacing the glow plugs on the Audi A4 B8 2.0 TDI
Audi A4 (2007-2016 / B8) .. of the glow plugs on the Audi A4 B8, with 2.0 TDI and 3.0 TDI engine. First of all we open the bonnet of our car and start by removing the caps.. …
Guide to replacing the timing belt of the Audi A4 2.0 TDI
Guide to replacing the timing belt of the Audi A4 2.0 TDI
Audi A4 (2007-2016 / B8) .. and replace the timing belt of the Audi A4 2.0 TDI. First, we open the hood of the car and start disassembling and removing the front bumper, thus.. …
When and how to replace the timing belt of the Audi A4 2.0 TDI
When and how to replace the timing belt of the Audi A4 2.0 TDI
Audi A4 (2007-2016 / B8) .. for replacing the timing belt of the Audi A4 2.0 TDI; the manufacturer declares that, on this type of engine, the timing belt should be replaced.. …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos