Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the radiator in the Audi A4?

Model: Audi A4 B5 - Years 1994-2000
Part: Radiator

In this tutorial we can see how to disassemble the radiator in the Audi A4, an operation that requires good manual skills. Before doing this, we will have to remove the front bumper and wait for the engine to be completely cold. We start by unscrewing all the bolts located on the front side of the radiator with a 10mm socket wrench, then we open the lower tap with a flat tip screwdriver, drain all the liquid contained in the system and disconnect the two rear pipes. We then remove the front cover, extract the two upper fixing pins and separate the radiator from the support. If necessary, we transfer the old temperature sensor to the replacement radiator.

Posted on 11 January 2023 by ScegliAuto

Video tutorial

Related tutorials

How to remove the heating radiator of the Audi A4 B7
How to remove the heating radiator of the Audi A4 B7
Audi A4 (2004-2008 / B7) In today's video tutorial we will see how to remove and replace the radiator of the passenger compartment heating of the Audi A4 B7, in simple steps.…
How do you disassemble the engine coolant radiator in the Audi A4 B8?
How do you disassemble the engine coolant radiator in the Audi A4 B8?
Audi A4 (2007-2016 / B8) The reasons that require the disassembly of the radiator mentioned above are usually the accumulation of dirt and consequent blockage of the pipes, a…
How do you replace the radiator on the Audi A4?
How do you replace the radiator on the Audi A4?
Audi A4 (2000-2004 / B6) In order to replace the Audi A4 radiator it is necessary to first remove the front bumper, loosening all the bolts in the positions shown in the tuto…

Other guides you may be interested in

How to Remove the Window Regulator Motor from a Peugeot 106

How do we remove the right door panel of a Peugeot 106? Let's see together in this video how to proceed. Use a lever to remove the plastic cover of the door handle, then, with a screwdriver, undo the securing screws on the plastic panel. Once all the screws are removed, detach the plastic clips that secure the door. Remove the window crank. With your hands, take off the door panel, disconnect any power connectors and release cable. Remove the window regulator motor inside the door by peeling off the adhesive protection.

Watch the video!


by ScegliAuto

More videos