Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Audi A7 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Engine oil

See other generations:
Video tutorial

A very simple DIY maintenance task is replacing the engine oil, the oil filter, the engine air filter, and the cabin air filter using a little trick to drain the oil without lifting the vehicle: suction it through the dipstick tube with a manual pump.

Start by disconnecting the flange attached to the engine air filter box to remove the old filter and insert the new one. Then, remove the cap from the dipstick tube and insert the hose to suction the engine oil before replacing the cartridge.

Finally, replace the cabin air filter located on the passenger side, just above the heel pad.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter of the Audi A7
How to Replace the Cabin Air Filter of the Audi A7
Audi A7 (2010-2017 / MK 1) Replacing the cabin air filter of your first-generation Audi A7 is one of the simplest maintenance tasks you can perform on your own. In fact, just f…
How to Reset the Oil Light on an Audi A7
How to Reset the Oil Light on an Audi A7
Audi A7 (2010-2017 / MK 1) If you own a first-generation Audi A7 and want to manually reset the oil light, follow the steps outlined in this guide. First, enter the cabin and t…
How to Reset the Service on an Audi A7
How to Reset the Service on an Audi A7
Audi A7 (2010-2017 / MK 1) In this brief video tutorial, you will see the step-by-step procedure to reset the service on an Audi A7, first generation model produced from 2010 t…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos