Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Serie 7
  6. : 1986-1994 (MK 2, E32, MK 3, E38)

BMW Serie 7 Years 1986-1994 (MK 2, E32, MK 3, E38)

BMW Serie 7 (1986-1994 / MK 2, MK 3, E32, E38)
How to Replace the Timing Chain on a BMW 7 Series?

To replace the timing chain on a BMW 7 Series, open the hood to access the components inside the engine bay. First, remove the bolts securing some components …Read all…
Posted on 19 July 2026 by ScegliAuto
BMW Serie 7 (1986-1994 / MK 2, MK 3, E32, E38)
How to Remove the Rear Bumper on a BMW 7 Series?

In this tutorial, you will see how to remove the rear bumper on a BMW 7 Series E38, a very simple operation. Start by removing the bolt located inside the …Read all…
Posted on 15 July 2026 by ScegliAuto
BMW Serie 7 (1986-1994 / MK 2, MK 3, E32, E38)
Front Bumper Removal Instructions

To remove the front bumper, start by removing the license plate bracket. Next, pull out the plastic clips that secure the rubber portion located at the license …Read all…
Posted on 27 February 2026 by ScegliAuto
BMW Serie 7 (1986-1994 / MK 2, MK 3, E32, E38)
Instructions for Removing Front Turn Signal

As with all older cars, removing the front turn signal is quick and intuitive. You don’t need to disassemble anything else besides the headlamp itself, …Read all…
Posted on 26 February 2026 by ScegliAuto
BMW Serie 7 (1986-1994 / MK 2, MK 3, E32, E38)
Car Stereo Removal Instructions

The car stereo is located at the bottom of the center console. To remove it, simply pull it out of its slot: start by disengaging the trim around the stereo to …Read all…
Posted on 25 February 2026 by ScegliAuto
BMW Serie 7 (1986-1994 / MK 2, MK 3, E32, E38)
Instructions for Replacing the Front Headlight

If the headlight is broken, before proceeding with disassembly, remove any glass remnants. Then, unscrew the mounting screws located at the top of the …Read all…
Posted on 21 February 2026 by ScegliAuto
BMW Serie 7 (1986-1994 / MK 2, MK 3, E32, E38)
Instructions for Removing the Front Fender

To remove the front fender, first remove the hood (the hood hinge support bracket is located on the edge of the fender) and the bumper (one of the mounting …Read all…
Posted on 21 February 2026 by ScegliAuto
BMW Serie 7 (1986-1994 / MK 2, MK 3, E32, E38)
Instructions for Removing the Front Bumper

To easily remove the front bumper, it is certainly helpful to lift the vehicle on suitable jack stands (or a lift), remove the front wheels and then the …Read all…
Posted on 19 February 2026 by ScegliAuto
BMW Serie 7 (1986-1994 / MK 2, MK 3, E32, E38)
Radiator Removal and Replacement

First, perform this repair with the engine cold to avoid burns. The radiator is simply attached to the front grille with snap fasteners. Remove the clamps …Read all…
Posted on 5 February 2026 by ScegliAuto
Airbag (5) Speaker (3) Air conditioning (1) Car stereo (5) Battery (3) Air vents (1) Bushings (2) Control arm (4) Spark plugs (1) Body (5) Control unit (1) Key (9) Timing belt (1) V-belt (1) A/C controls (1) Onboard computer (1) Checks and maintenance (4) Dashboard (10) Brake rotors (2) Headlight (3) Air filter (1) Cabin air filter (4) Oil filter (1) Clutch (1) Grille (2) Accessory kit (4) Light bulb (1) Side marker bulb (1) Antifreeze coolant (1) Handle (5) Exhaust muffler (1) Engine (4) Power window motor (1) Starter motor (1) Engine oil (1) Clock (1) Door trim panel (3) Front bumper (3) Rear bumper (2) Tires (1) Pump (1) Fuel pump (1) Car door (1) Push button (1) Radiator (1) Fuse box (17) Seat (2) Parking sensors (1) Oxygen sensor (1) Side mirror (3) Warning light – error code (15) (4) Service warning light (9) Brake drums and shoes (1) Fuel cap (2) Drivetrain (1) Center console tunnel (2) Valve (1) Blower motor (2)

See also:

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos