Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the airbag from the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Airbag

See other generations:
Video tutorial

Today we will explain how to remove the airbag from the steering wheel of the 2007 BMW 3 Series model e89. To carry out this simple operation, we need to insert a flat-tipped screwdriver into the lower hole of the steering wheel, which we will push inward to release the latch that locks the central body.

We then disconnect the central body from the connector to remove it completely, thus removing the airbag.

Before proceeding with this operation, however, it is necessary to disconnect the vehicle's battery to prevent the system from activating during its removal.


Posted on 13 June 2025 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel Airbag from a BMW 3 Series?
How to Remove the Steering Wheel Airbag from a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To remove the steering wheel airbag from a BMW 3 Series, insert a screwdriver into the designated holes located at the lower back of the steering whe…
How to Remove the Steering Wheel Airbag on the BMW 3 Series?
How to Remove the Steering Wheel Airbag on the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To remove the steering wheel airbag on the BMW 3 Series, rotate the steering wheel left and right so that the screws located at the back can be compl…
How to Replace the Airbag Manufacturer Emblem on a BMW 3 Series
How to Replace the Airbag Manufacturer Emblem on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) The following steps will show you how to remove and replace the airbag manufacturer emblem on a BMW 3 Series. First, get inside the vehicle and start…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos