Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin air filter of the BMW 3 Series.

Model: BMW Serie 3 G20 - Years 2019-2026
Part: Cabin air filter

In this short guide, we will see the instructions that will allow us to replace the cabin air filter of the BMW 3 Series. First, we open the front passenger side door and start removing the plastic partition found under the glove compartment; then we remove the cover of the pollen filter box, thus extracting the cartridge found inside, as shown in the video. At this point, we insert the new cabin air filter in the correct direction, reassembling the cover and the plastic partition last.

Posted on 20 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a BMW 3 Series
How to Replace the Cabin Air Filter in a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Before you start, sit in the driver's seat of your BMW 3 Series. First, unscrew and remove the screws that secure the cabin air filter cover. Then, d…
Replacing the Air Filter on a BMW 3 Series
Replacing the Air Filter on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Replacing the air filter on a BMW 3 Series? Open the hood and let's see how to replace the filter. Locate the air filter housing on the right side of…
Remove the Air Filter on BMW 3 Series
Remove the Air Filter on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Replace the air filter on BMW 3 Series. Open the car door, pull up the hood release lever located at the bottom left of the dashboard, and lift the h…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos