|
Do it yourself
| |||
| ||||
How do you reset the Service light on a BMW Series 1?
Model: BMW Serie 1
F20, MK 2, F21
- Years 2011-2019
It is possible to completely turn off the Service light that appears on the instrument panel of the BMW Series 1 by turning on the ignition and allowing all error messages to disappear. Once you reach the main screen, you need to press and hold the button at the bottom left of the instrument panel until the icon of a car on a lift appears. At this point, you should press the BC button located on the lever to the left of the steering wheel. An icon of a clock will appear, and once it disappears, it will indicate that the light has been reset correctly.
Posted on 21 December 2025 by ScegliAuto
Video tutorial
Related tutorials
BMW Serie 1
(2011-2019 /
F20, MK 2, F21)
To reset the Service light on the BMW 1 Series, you need to turn on the instrument panel so that you can then press and hold the button on the left s…
BMW Serie 1
(2011-2019 /
F20, MK 2, F21)
To completely make the Service light disappear from the instrument cluster of the BMW Series 1, you need to turn on the instrument cluster and wait f…
BMW Serie 1
(2019-2026 /
MK 3, F40)
The Service warning light on the BMW 1 Series can be reset by turning on the instrument panel by turning the key in the relative ignition lock: in th…
Other guides you may be interested in
|
How to Remove the Spark Plugs from a Volkswagen Up
How to remove and replace the spark plugs on a Volkswagen Up? Follow these steps for proper removal. Pull the lever to open the engine compartment and lift the front bonnet, securing it in place. Remove the plastic soundproofing panel on the cylinder head, then disconnect the power connectors using a screwdriver after unscrewing them with a socket wrench. Pull off the coils by hand and unscrew the spark plugs with the socket wrench, finally pulling them out of the cylinder head. Take the new spark plugs and guide them into the engine head using the extension of the socket wrench. Finally, tighten the spark plugs securely and reconnect the respective power connectors. To finish: reassemble the soundproofing panel and close the engine bonnet. - Socket wrench with sockets - Flat or screwdriver bits - Battery-powered screwdriver - Protective gloves. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.091
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
