Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a BMW X1 E84-F48-U11

Model: BMW X1 F48 - Years 2015-2022
Part: Service warning light

Let's see how to reset the service light on a BMW X1: for the E84 version: turn on the ignition and press the button on the dashboard until the service menu with the yellow triangle appears. Using the up/down buttons on the lever to the left of the steering column, navigate to "engine oil". Press the "BC" button on the left lever until the word "reset" appears; hold the "BC" button for a few seconds to confirm the reset. For the F48 version: turn on the ignition, hold the button on the dashboard until the service menu appears, then find "engine oil". Again, hold the button until "reset" appears and confirm by holding the button. For the U11 version: press the start button three times, which will enter the diagnostic system. Hold the "settings" button on the right side of the steering wheel until the service menu opens. Press the "settings" button repeatedly until you select "engine oil". Continue holding the "settings" button until the word "reset" appears, then press "settings" again and wait for the reset progress bar to complete.

Posted on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW X1 (2015-2022 / F48) This video tutorial shows how to reset the service light on the BMW X1 F48 produced from 2015 to 2022. This procedure can help if the service light r…
BMW X1 (2015-2022 / F48) In the following guide, we will discover together what are all the various steps required to manually complete the reset of the service light on the …
BMW X1 (2015-2022 / F48) Reset the service light on the BMW X1 F48 without tools. Turn on the ignition (without pressing the brake to avoid starting the engine). Press and ho…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos