Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace Spark Plugs and Ignition Coils

Model: BMW Z3 MK 1 - Years 1995-2002
Part: Spark plugs

The video shows how to replace the spark plugs and ignition coils on a BMW Z3. First, using a ratchet with a 10 mm socket, remove the plastic engine cover by unscrewing the screws that hold it in place (the screws are protected by a small cover that needs to be lifted with a screwdriver). Before removing it, unscrew and take out the oil sump plug as well. Once the cover is off, you will have access to the spark plugs and coils. First, use a screwdriver to lift the safety clip; now disconnect the connector from the coil, then with a 10 mm socket, unscrew the fixing bolts; now extract the coil. To reach the spark plug, you will need a ratchet with a spark plug socket. Unscrew and remove the old spark plug. Clean the cylinder of any debris. Before fitting the new spark plug, it is advisable to apply a bit of dielectric silicone to the end of the spark plug and the coil (at their junction point). Now insert the new spark plug into the cylinder and screw it in with the spark plug socket, then refit the coil and screw in the fixing bolts; finally, reconnect the coil connector and reinsert the safety clip by pushing it down. Refit the plastic cover.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Z3 (1995-2002 / MK 1) In order to open the convertible top of the BMW Z4, you need to turn on the instrument panel by inserting the ignition key into the appropriate slot:…
BMW Z3 (1995-2002 / MK 1) Are the rear lights of your BMW Z3 not working anymore? Watch this video to learn how to replace the bulbs: Open the boot lid, remove the plastic pan…
BMW Z3 (1995-2002 / MK 1) On the BMW Z3 Roadster 2.8, produced from 1995 to 2002, it is advisable to replace the air filter every 9,300 miles or at most every 12,400 miles, or…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos