Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Replacement on BMW X3

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Engine oil

Replacing the engine oil along with the used filter on your car? Let's see how to do it on a BMW X3. Open the car door and pull up the hood release lever located inside the vehicle. Lift the hood and secure it. Use a socket wrench to unscrew the large locking pin of the cap where the oil filter is located. Remove the worn oil filter and install a new one. Raise the car on a jack and unscrew the oil pan bolt; let the fluid drain into a container. Finally, top off the engine of the X3 with new oil, using a funnel.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the engine oil and oil filter of the BMW X3
Replacement of the engine oil and oil filter of the BMW X3
BMW X3 (2017-2024 / MK 3, G01) The following information will allow us to perform the routine maintenance of replacing the engine oil and oil filter of the BMW X3. First, we lift t…
How to Change the Engine Oil in a BMW X3?
BMW X3 (2017-2024 / MK 3, G01) In this tutorial, you will see how to change the engine oil in a BMW X3, a very simple operation. First, wait for the engine to cool down. Then, go u…
How do you replace the motor oil of the BMW X3?
How do you replace the motor oil of the BMW X3?
BMW X3 (2003-2010 / MK 1, E83) To replace the motor oil of the BMW X3, you need to loosen the drain plug of the oil pan, which is located at the bottom of the vehicle: once the oil…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos