Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Cabin air filter replacement

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Cabin air filter
Operation: Cabin air filter replacement

Replacing the pollen filter frequently helps prevent allergies as it purifies the air in the passenger compartment and is a very simple operation. The filter is located in the engine compartment under the windshield. To access the removal it is necessary to unscrew the two wing nuts that fix the cover, which can be done by hand. Once the filter cover has been removed, remove the cartridge from its housing and then carefully pull it outwards to avoid the dispersion of dust. Get the pollen filter of the same model identical to the original. Clean the housing compartment from any dirt. Put the new cartridge back into the container paying attention to the direction of positioning and close the lid with the wing nuts.


Posted on 8 July 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Serie 3 2005-2013 - Where is the cabin filter of the BMW E90? Read Answer
    • Serie 3 1990-2001 - How much does the BMW E46 cabin air filter cost? Read Answer
    • Serie 3 2005-2013 - Where is the cabin filter of the BMW 320 F30-F31? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos