Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fan on BMW 5

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Blower motor

See other generations:
Video tutorial

Replace the air fan on BMW 5? Remove the dashboard cover plastics. Pry off the plastic under the front windshield with a lever, then unscrew the cover.

Remove the cover drawer on the right side of the dashboard, unscrewing all the securing screws. Take off the radio frame and all the cover plastics until you access the fan (located behind the center air vents).

Find and disconnect the fan connector, then remove the fan from the cabin. Insert a new fan (connect the power connector).

Reinstall all the cover panels and tighten the screws. Turn on the ignition and check if the replacement fan works.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

Removing the Fan Resistor on a BMW 5
Removing the Fan Resistor on a BMW 5
BMW Serie 5 (1995-2003 / E39) Is the air fan damaged? Let's see how to remove the fan resistor on a BMW 5. Use a pry tool to remove the plastic cover under the dashboard (on the c…
Where is the cabin fan located in the BMW 5 Series?
Where is the cabin fan located in the BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) In this video we can see where the cabin fan is located in the BMW 5 Series and how to proceed in case we need to replace it. As shown, the fan in qu…
Disassembly and Replacement of the Cabin Fan in a BMW 5 Series
Disassembly and Replacement of the Cabin Fan in a BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Here are step-by-step instructions to disassemble and replace the cabin fan in your BMW 5 Series. First, get inside the vehicle and begin removing th…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos