Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Engine Oil Level Sensor on BMW 3 Series E46

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006

See other generations:
Video tutorial

Today, you will learn how to remove and replace the engine oil level sensor on a BMW 3 Series E46. First, open and lift the hood. Using a socket wrench, start loosening the oil filter bolt and replace the filter.

Next, lift the vehicle to access the oil pan. Once you locate the sensor, disconnect its electrical connector and remove the sensor screws with a screwdriver. Finally, remove the old sensor and replace it with the new one, using the original replacement part.

Follow the video guide until the end!


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Check Engine Oil Level on BMW 3 Series
Check Engine Oil Level on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Check the engine oil level on a BMW 3 Series. Open the car door, pull the plastic lever located at the bottom left of the dashboard, and lift the hoo…
Check Engine Oil on BMW 3 Series
Check Engine Oil on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Check the engine oil level on a BMW 3 Series. Open and lift the hood. Locate the dipstick with the ring to pull it out; remove it and check the oil l…
Replacing Temperature Sensor on BMW 3 Series
Replacing Temperature Sensor on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How do you remove the temperature sensor on a BMW 3 Series? Raise the hood of the car to locate the temperature sensor and remove it. Remove the engi…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos