Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the automatic gearshift warning light on the BMW 3 Series E90

Model: BMW Serie 3 E92, E90, E91 - Years 2005-2013
Part: Warning light – error code

Let's find out in this short and simple guide how to reset the automatic gearshift warning light on the BMW 3 Series E90, following these simple steps. First of all we get on board the car and turn on the ignition by pressing the button; then we go to press and hold the accelerator pedal for thirty seconds. At this point we can remove the key from the panel again; reinsert it and turn on the ignition and the engine again to complete the reset procedure for the automatic gearbox warning light. Carry out this operation every time the gear oil is changed!

Posted on 4 October 2021 by ScegliAuto

Video tutorial

Related tutorials

Reset tire pressure warning light BMW 3 Series E90
Reset tire pressure warning light BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video tutorial we will see how to reset the tire pressure warning light on a BMW 3 Series E90. Before intervening with the reset procedure, i…
How to activate the sensitivity of the automatic headlights on a BMW 3 Series E90
How to activate the sensitivity of the automatic headlights on a BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video we see how to set the sensitivity of the automatic headlights on a BMW 3 Series E90 version: we will have to use the lever of the left …
Parking sensor warning light reset on BMW 3 Series E90
Parking sensor warning light reset on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) We see in this video the instructions to be able to reset the parking sensor light on a BMW 3 Series E90, following the instructions below. In order …

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer

How to Remove the Cabin Filter from a Nissan Juke

In this video, let’s see how to remove the cabin air filter from a Nissan Juke. Open the glove compartment and unclip the end stop arms. Then, use a screwdriver to remove the securing screws. After completing the previous steps, unscrew the side screws in the glove compartment and remove the plastic cover. Unscrew the screws again, and after disconnecting the power cables, pull the glove compartment away from the dashboard. Then, slide the air filter out of its housing as shown in the video. Insert the new filter and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos