Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Cabin air filter replacement

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Cabin air filter
Operation: Cabin air filter replacement

The cabin air filter is located at the base of the windshield. To disassemble it, a series of screws must be removed from the perimeter of a crankcase located in the engine hood, just before the wipers. The casing crosses the entire car transversely and also acts as a container for the filter itself, to which it is bound by means of plastic joints. Once the old filter has been replaced with the new one, it is advisable to also clean the ducts with suitable products, usually sanitizing sprays and then activate the ventilation system with the windows open to eliminate the vapors of the products used.


Posted on 20 July 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Serie 3 2005-2013 - Where is the cabin filter of the BMW E90? Read Answer
    • Serie 3 1990-2001 - How much does the BMW E46 cabin air filter cost? Read Answer
    • Serie 3 2005-2013 - Where is the cabin filter of the BMW 320 F30-F31? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos