Do it yourself
Frequently asked questions about cars and motorcycles

Engine Oil and Oil Filter Change on BMW X3

Model: BMW X3 MK 3, G01 - Years 2017-2024
Part: Engine oil

For this vehicle, use a synthetic 0W-20 engine oil. Lift the hood and, once secure, remove the engine cover as shown in the video. Now remove the cover on your right, and near the windshield, you will see the oil filter, which needs to be unscrewed with a 27 mm socket wrench. Next, for the oil change, access under the engine compartment and unscrew the small cover present there. Unscrew the exposed drain bolt with a 17 mm wrench and collect the oil in a container, then refill the same amount from the upper compartment, and you're done.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW X3 (2010-2017 / MK 2, F25) Warm up the engine: run the engine of your BMW X3 for about 10 minutes to get the oil flowing. Lift the car: place the car on four jack stands to acc…
BMW X3 (2003-2010 / MK 1, E83) Let's go through the removal of the cabin air filter on a BMW X3. Lift the hood to access the cabin air filter: the filter is located in the plastic …
BMW X3 (2003-2010 / MK 1, E83) Replacing the engine oil along with the used filter on your car? Let's see how to do it on a BMW X3. Open the car door and pull up the hood release l…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos