Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil and Oil Filter on the BMW X3

Model: BMW X3 MK 2, F25 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Engine oil

See other generations:
Video tutorial

This guide will show you how to perform routine maintenance by replacing the engine oil and oil filter on the BMW X3. First, lift the vehicle and remove the plastic panel protecting the engine by unscrewing all the fastening screws; then, unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes, as shown in the video.

Next, unscrew the oil filter cartridge and replace it with a new one (tightening gently); finally, pour in the appropriate oil for your engine!


Updated on 17 June 2026 by ScegliAuto


Related tutorials

BMW X3 (2017-2024 / MK 3, G01) To perform the regular maintenance service, follow this simple guide; let's see how to replace the engine oil and oil filter on the BMW X3. First, li…
BMW X3 (2003-2010 / E83, MK 1) In this tutorial, you will see how to change the engine oil and filter in a BMW X3, a very simple and quick operation. First, wait until the engine i…
BMW X3 (2017-2024 / MK 3, G01) In this tutorial, you will see how to change the engine oil in a BMW X3, a very simple operation. First, wait for the engine to cool down. Then, go u…

Other guides you may be interested in

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos